Tecco mesh is an effective and economical rockfall barrier to provide dynamic surface support. Made of high tensile steel wire, tecco wire mesh can easily tackle rockburst conditions or squeeze ground by high load capacity.
Similar to a chain link mesh, the high-tensile tecco mesh is also woven in a diamond structure and quite convenient to store. It’s easy and quick to unroll and install the tecco mesh with the help of mechanized technology, which largely save you time on the project.
A complete tecco slope stabilization system generally contains several parts: tecco mesh, wire rope anchor, special spike plate, boundary rope, sewing rope, and steel clip. Tecco meshes can be fastened tightly onto the slope surface by wire rope anchors and steel clips. The special spike plate grabs the mesh in 6 positions and increases the load capacity, the load transfer, and the blasting resistance effectively.
Tecco slope stabilization system is suitable for soil texture and similar slope surfaces, not only realizing slope stabilization but also allowing plants to grow naturally. It has replaced the traditional mortar slag stone structure and provided a balancing method between development and environmental protection.
Tecco wire mesh can be applied in the following fields:
|TYPE||DIAGONAL MESH||MESH WIDTH||WIRE DIAMETER||TENSILE STRENGTH||COATING TYPE||COATING MASS|
|G45/2||62*95||48||2||1770||GALFAN WIRE||MIN 150G/M2|
|NOTE||STAINLESS STEEL WIRE AVAILABLE|
High Tensile Strength
Made of high-tensile steel wire, the tensile strength of tecco mesh wire exceeds 1770 N/mm², which will protect the slope maximally and allow slight deformation while retaining tension.
Diamond Mesh Structure
The special mesh structure permits an even stress transfer from the forcing points to anchor rods, preventing deformation efficiently. The flexible tecco mesh structure fits well in any geological conditions including irregular terrain, providing optimal stabilization.
Unlike the wrapped edge of chain link, the end of tecco mesh is self-winded which ensures a more stable edge structure, smaller mesh overlap, and easier mesh lay.
The high-strength steel wire used for tecco wire mesh is strong and lightweight, making transportation and installation easier.
The anti-corrosion coating treatment enables tecco meshes to possess high performance of corrosion resistance, effectively prolonging its life service and greatly reducing subsequent maintenance work.
The rhomboid mesh allows plants to grow regularly, perfectly balancing the slope stabilization and the beauty of the landscape.
Yes. The flexible high-tensile steel wire mesh slope protection system can be combined with a surface stabilization to meet the requirements for the stabilization of the deeper-seated sliding surfaces.